How do I use the Switchbox in a Barco Classroom?

You may see switchboxes in some of the classrooms on Campus.

Please press the input selector to changes sources. Barco is Input #1, and the classroom PC is Input #2.

How to Project Classroom PC

1. Turn Projector(s) and/or LCD displays on
2. Locate classroom switchbox and select which source want to use.

• • Select PC.
  • PC content should project after switchbox makes the connection.

3. Conduct class as you normally would.
4. At the conclusion of class, power off the projector(s) and/or LCD displays.

How to Project Laptop Using Barco

1. Turn Projector(s) and/or LCD displays on.
2. Locate classroom switchbox and select which source you want to use.

• • Select Barco.
  • Barco Splash screen should project after switchbox makes the connection.

3. On your device, launch the MirrorOp software and type the room’s hostname into the “Input hostname or IP” box and click Connect.
4. When you connect, the projector will display a 4-digit code, which you can enter in to MirrorOp on your device.
5. After doing so, click the Play button in MirrorOp and your device’s content will display on the projector.
6. Conduct class as you normally would.
7. At the conclusion of class, disconnect from MirrorOp, power off the projector(s) and/or LCD displays.

More information about MirrorOp can be found here: 

https://help.kings.edu/hc/en-us/articles/1500004661822-What-is-MirrorOp-and-How-to-use-it-

If you have any questions or need additional assistance, please submit a request or contact the Help Desk at 570-208-5900 ext. 4357.